The EDA’s Product Knowledge Modules help businesses like yours create cross-selling and up-selling opportunities by building knowledge and confidence. These training modules have won a Princess Royal Training Award so you can be assured of their value. It’s probably why EDA businesses have taken over 11,000 training modules since launch.

Introduction to the Principles of Electricity is one of the 12 EDA’s Product Knowledge Modules created to develop the professional knowledge and confidence of your team.

Training in Introduction to the Principles of Electricity includes:

• Introducing electricity
• Direct current and alternating current
• Electrical safety
• Ratings and markings of electrical equipment
• Introduction to low-voltage electrical installations
• Electricity and the environment
• Qualifications and accreditations for electrical installation work

Online learning through The EDA Academy

All the EDA Product Knowledge Modules are available to study electronically via The EDA Academy, the Association’s e-learning portal. Each training course is delivered through video and interactive learning, but if the original hard copy textbook is preferred these are still available.

Years of knowledge to give your team a commercial edge

City & Guilds accredited, this training programme harnesses decades of combined expertise from product experts at EDA manufacturers and allied trade associations to create an accessible and practical training opportunity for you and your team.

EDA Product Knowledge modules are also approved for Continuing Professional Development by The CPD Certification Service.

Test your knowledge

Have a go at this quiz sampled from the Introduction to the Principles of Electricity module. Then check your answers below. If the results show that you need to boost your team’s know-how, talk to the EDA today.

Q1: Why is HV used for power transmission in the National Grid?
Q2: What single-phase supply voltage is normally used in the UK (not including construction site safety supplies)?
Q3: What type of overcurrent protection devices contain a wire which overheats and melts if too much current flows?
Q4: What does ‘AC 230 V’ on a product mean?
Q5: What types of protective device might be found in a modern consumer unit?
Q6: What does ‘ECS’ stand for?

Scroll down for answers

Answers

Q1: Using HV reduces the current in transmission cables, and therefore losses due to heat
Q2: AC 230 V 50 Hz
Q3: Fuse
Q4: It can be used on AC supplies with a supply voltage of 230 V
Q5: MCBs, RCDs or RCBOs
Q6: Electrotechnical Certification Scheme

How did you do?

Full marks: Well done.

3 – 5 out of 6: Not bad. Could the EDA training help you to fill in any gaps in your knowledge and help you progress in your career?

Less than 3: The EDA Product Knowledge Programme could be just what you need to boost sales.

Watch the video and download the Course Directory

 There’s plenty of information online at www.eda.org.uk, including videos and a downloadable course directory, giving you a summary of what’s covered in each of the 12 training modules.

The EDA team is ready to help. Call 020 3141 7350 or email training@eda.org.uk

For more information, click here

Find more ‘EDA Insight’ articles here

The post EDA Insight: Spark Your Sales Confidence appeared first on Professional Electricians Wholesaler.

Wiring Devices and Controls is one of the 12 EDA’s Product Knowledge Modules created to develop the professional knowledge and confidence of your team.

Training in Wiring Devices and Controls includes:

• Introduction to wiring devices and controls
• Switches
• Styles, mounting arrangements and backboxes for wall-mounted socket-outlets and switches and associated products
• Plugs and socket-outlets
• Fixed wiring to free wiring connection devices
• Modular wiring accessories
• Other overhead lighting accessories
• Ancillaries
• Smart controls

E-learning option now available via The EDA Academy

All the EDA Product Knowledge Modules are available to study electronically via The EDA Academy, the Association’s e-learning portal. Each training course is delivered through video and interactive learning, but if the original hard copy text book is preferred these are still available.

Talk to the EDA team and ask for a demo of the e-learning platform.

Years of knowledge to give your team a commercial edge

City & Guilds accredited, this training programme harnesses decades of combined expertise from product experts at EDA manufacturers and allied trade associations to create an accessible and practical training opportunity for you and your team.

EDA Product Knowledge modules are also approved for Continuing Professional Development by The CPD Certification Service.

Test your knowledge

Have a go at this quiz sampled from the Wiring Devices and Controls module. Then check your answers below. If the results show that you need to boost your team’s know-how, talk to the EDA today.

Q1: What is the difference between a radial circuit and a ring final circuit?

Q2: What are double-pole switches often used for?
Q3: A customer says that the screws supplied with a socket-outlet are too short to

reach the holes in the flush backbox. What could you offer to supply, to help?
Q4: What does a Euro-plug converter do?
Q5: What do we call the part of an accessory where an electrical connection is made to the wiring?
Q6: What is a ceiling rose?

Scroll for Answers 

Q1: In radial circuits, the wiring goes sequentially from one accessory to the next.
In ring final circuits, the wiring goes from one accessory to the next, until the final accessory, which is then wired back to the consumer unit to complete the circuit.
Q2: Control of power to appliances like showers.
Q3: Longer mounting screws, or extension studs.
Q4: It is secured around a European plug to permit it to be used with a UK socket-outlet.
Q5: Terminal.
Q6: A ceiling rose contains terminals to connect both the fixed wiring from the lighting circuit and the flexible cable from which a standard lamp holder hangs.

How did you do?

Full marks: Well done!

3 – 5 out of 6: Not bad. Could the EDA training help you to fill in any gaps in your knowledge and help you progress in your career?

Less than 3: The EDA Product Knowledge Programme could be just what you need to boost sales.

Watch the video and download the course directory

There’s plenty of information online at www.eda.org.uk including video and a downloadable course directory, giving you a summary of what’s covered in each of the 12 training modules.

The EDA team is ready to help. Call 020 3141 7350 or email training@eda.org.uk

For more information, click here

The post EDA Insight modules: Wiring Devices and Controls appeared first on Professional Electricians Wholesaler.

Over the last three years demand for the EDA’s Product Knowledge Module on Renewables Including EV Charging has jumped by 89%.

Renewables Including EV Charging is one of the 12 EDA’s Product Knowledge Modules created to develop the professional knowledge and confidence of your team. These training modules won a Princess Royal Training Award so you can be assured of their value.

The EDA modules are completely flexible and can be studied in any order or combination. You choose only the training your team needs.

Training in Renewables including EV Charging includes:

• Promotion of uptake of renewables
• Solar photovoltaic
• Electrical energy storage systems
• Electric vehicles
• Heat Pumps
• Wind turbines
• Energy conservation

E-learning option now available via The EDA Academy

All the EDA Product Knowledge Modules are available to study electronically via The EDA Academy, the Association’s e-learning portal. Each training course is delivered through video and interactive learning, but if the original hard copy textbook is preferred these are still available.

Years of knowledge to give your team a commercial edge

City & Guilds accredited, this training programme harnesses decades of combined expertise from product experts at EDA manufacturers and allied trade associations to create an accessible and practical training opportunity for you and your team.

EDA Product Knowledge modules are also approved for Continuing Professional Development by The CPD Certification Service.

Test your knowledge

Have a go at this quiz sampled from the Renewables including EV Charging module. Then check your answers below. If the results show that you need to boost your team’s know-how, talk to the EDA today.

Q1: What does the acronym SSEG stand for?

Q2: Name the two most common forms of PV connection arrangement
Q3: Name the three most common forms of electric vehicles.
Q4: What is the universal socket-outlet type on an AC charger?
Q5: What is the nominal capacity of a battery?
Q6: What is the lower and higher voltage range limits for a 230 V supply in

the UK?

Scroll for answers

Q1: Small-scale embedded generation
Q2: On-grid and off-grid
Q3: HEVs, PHEVs and BEVs
Q4: Type 2
Q5: How much energy a battery can nominally deliver from full charge
Q6: 216.2–253.0 V

How did you do?

Full marks: Well done!

3 – 5 out of 6: Not bad. Could the EDA training help you to fill in any gaps in your knowledge and help you progress in your career?

Less than 3: The EDA Product Knowledge Programme could be just what you need to boost sales.

Watch the video and download the course directory

There’s plenty of information online at www.eda.org.uk including video and downloadable course directory, giving you a summary of what’s covered in each of the 12 training modules.

The EDA team is ready to help. Call 020 3141 7350 or email training@eda.org.uk

For more information, click here

The post EDA Insight modules: Renewables and EV Charging Quiz appeared first on Professional Electricians Wholesaler.

Unleash your potential for winning IT and Data Infrastructure projects

The EDA’s Product Knowledge Modules help businesses like yours create cross-selling and up-selling opportunities by building knowledge and confidence. These training modules have won a Princess Royal Training Award so you can be assured of their value.

IT and Data Infrastructure is one of 12 training courses in the programme. The EDA modules are completely flexible and can be studied in any order or combination. You choose only the training your team needs.

 E-learning option

All the EDA training modules are available in a digital format instead of a printed textbook. The digital learning option is a complete e-learning experience with videos and interactive content. The EDA team is happy to talk you through your options and can give you a demonstration of the new e-learning platform.

IT and Data Infrastructure training module covers:

• Information technology/data communications
• Uninterruptible power supply
• Structured cabling
• Cabinets and racks
• Connectivity
• Termination
• Test equipment
• Cloud computing and data centres
• Quality and best practice

Years of knowledge to give your team a commercial edge

City & Guilds accredited, this training programme harnesses decades of combined expertise from product experts at EDA manufacturers and allied trade associations to create an accessible and practical training opportunity for you and your team.

EDA Product Knowledge modules are also approved for Continuing Professional Development by The CPD Certification Service.

Test your knowledge

Have a go at this quiz sampled from the IT and Data Infrastructure module. Then check your answers below. If the results show that you need to boost your team’s know-how, talk to the EDA today.

Q1 What is a LAN?

Q2: True or False? Most small UPS are maintenance-free.

Q3: What three elements make up a basic optical fibre?

Q4: Name the two types of wiring schemes?

Q5: What is the requirement for the installer when issuing warranties?

Q6: List the four types of data centre.

Scroll for Answers

Q1: Local Area Network – a group of network devices connected together usually limited to a single building or a group of buildings in a limited area
Q2: True. Most small UPS are maintenance-free
Q3: 1. Core 2. Cladding 3. Primary coatin
Q4: 1. T568A 2. T568B
Q5: Must have formal product training
Q6: 1. Enterprise 2. Hosted 3. Co-location4. Cloud services

How did you do?

Full marks: Well done!

3 – 5 out of 6: Not bad. Could the EDA training help you to fill in any gaps in your knowledge and help you progress in your career?

Less than 3: The EDA Product Knowledge Programme could be just what you need to boost sales.

Watch the video and download the course directory

There’s plenty of information online at www.eda.org.uk, including video and a downloadable course directory giving you a summary of what’s covered in each of the 12 training modules.

The EDA team is ready to help. Call 020 3141 7350 or email training@eda.org.uk.

For more information, click here

The post EDA Insight modules: IT and Data Infrastructure Quiz appeared first on Professional Electricians Wholesaler.

The EDA’s Product Knowledge Modules help businesses like yours create cross-selling and up-selling opportunities by building knowledge and confidence. These training modules have won a Princess Royal Training Award so you can be assured of their value.

Customer Services is one of 12 training courses in the programme. The EDA modules are completely flexible and can be studied in any order or combination. You choose only the training your team needs.

E-learning option

All the cmodules are available in a digital format instead of a printed textbook. The digital learning option is a complete e-learning experience with videos and interactive content. The EDA team is happy to talk you through your options and can give you a demonstration of the new e-learning platform.

The Customer Service training module covers:

• Introducing our customers
• What is excellent customer service?
• The customer journey
• Customer service: right first time, every time
• The importance of stock availability
• Time management
• The skills of questioning and listening
• Selling add-ons as a service
• Measuring customer service and going the extra mile

TEST YOUR KNOWLEDGE

Have a go at this quiz sampled from the Customer Service module. Then check your answers below. If the results show that you need to boost your team’s know-how, talk to the EDA today.

Q1: If using barcodes in your warehouse, what must we ensure before putting away any product?

Q2: How would you describe the 80/20 rule?

Q3: What should you do if you have promised something to a customer by a certain time, but you realize it can’t be achieved?

Q4: How can you measure customer complaints for stock availability?

Q5: What will a to do list hopefully stop you doing?

Q6: What are the benefits of measuring your service?

SCROLL FOR ANSWERS

Q1: That the product has a barcode label on it.
Q2: 80% of your sales will be produced from 20% of your products.
Q3: Call them and let them know.
Q4: Number of Stock lines (SKU’s) / (divided by) number of SKU’s on backorder = % Available
Q5: Forgetting things
Q6: To identify areas where you need to improve by implementing corrective action

HOW DID YOU DO?

Full marks: Well done!

3 – 5 out of 6: Not bad. Could the EDA training help you to fill in any gaps in your knowledge and help you progress in your career?

Less than 3: The EDA Product Knowledge Programme could be just what you need to boost sales.

WATCH THE VIDEO AND DOWNLOAD THE COURSE DIRECTORY

There’s plenty of information online at www.eda.org.uk including videos and a downloadable Course Directory, giving you a summary of what’s covered in each of the 12 training modules. The EDA team is ready to help. Visit ???

For related articles, click here

The post EDA Insight modules: Customer Service Training Quiz appeared first on Professional Electricians Wholesaler.

The EDA’s Product Knowledge Modules help businesses like yours create cross-selling and up-selling opportunities by building knowledge and confidence.

These training modules have won a Princess Royal Training Award in 2022 so you can be assured of their value.

Cables and Cable Management is one of 12 training courses in the programme. The EDA modules are completely flexible and can be studied in any order or combination. You choose only the training your team needs.

 E-learning option

All the EDA training modules are available in a digital format instead of a printed textbook. The digital learning option is a complete e-learning experience with videos and interactive content. The EDA team is happy to talk you through your options and can give you a demonstration of the new e-learning platform.

Cables and Cable Management training module covers:

• Wiring systems
• Telecommunications cables
• Optical fibre cables
• Special cables
• Substandard and counterfeit cables
• Cable fire performance
• Cable management systems
• Cable termination

City & Guilds accredited, this training programme harnesses decades of combined expertise from product experts at EDA manufacturers and allied trade associations to create an accessible and practical training opportunity for you and your team.

Test your knowledge

Have a go at this quiz sampled from the Cables and Cable Management module. Then check your answers below. If the results show that you need to boost your team’s know-how, talk to the EDA today.

Q1: What colour insulation is used to denote a protective earth conductor?

Q2: Name two types of metallic CMS.

Q3: How many bits per second (b/s) are there in one Mb/s?

Q4: To what do the following acronyms refer: LFH and LSF?

Q5: What colour ducting is used to denote a telecommunication installation in the

public highway?

Q6: What is the connection between a conductor and other equipment or

accessory called?

Scroll for answers

Q1: Green/yellow

Q2: Pre-galvenised (PG) zinc-coated steel, electroplating with zinc (EZ) or powder coated (PC).

Q3: 1,000,000

Q4: Low fire hazards (LFH) and low smoke and fume (LSF) cables

Q5: Grey

Q6: A termination

How did you do?

 Full marks: Well done!

3 – 5 out of 6: Not bad. Could the EDA training help you to fill in any gaps in your knowledge and help you progress in your career?

Less than 3: The EDA Product Knowledge Programme could be just what you need to boost sales.

Watch the video and download the course directory

There’s plenty of information online at www.eda.org.uk including video and downloadable Course Directory, giving you a summary of what’s covered in each of the 12 training modules. The EDA team is ready to help. Call 020 3141 7350 or email training@eda.org.uk

For more information, click here

The post EDA Insight: Cables and Cable Management quiz appeared first on Professional Electricians Wholesaler.

The EDA’s Product Knowledge Modules help businesses like yours create cross-selling and up-selling opportunities by building knowledge and confidence.

These training modules have won a Princess Royal Training Award in 2022 so you can be assured of their value.

Heating and Ventilation is one of 12 training courses in the programme. The EDA modules are completely flexible and can be studied in any order or combination. You choose only the training your team needs.

E-learning option

All the EDA training modules are available in a digital format instead of a printed textbook. The digital learning option is a complete e-learning experience with videos and interactive content. The EDA team is happy to talk you through your options and can give you a demonstration of the new e-learning platform.

Heating and Ventilation training module covers:

• The principles of heat
• Heating – elements, controls and types of heaters
• The principles of hot water
• Types of water heaters
• The principles of ventilation
• Ventilation applications

Years of knowledge to give your team a commercial edge

City & Guilds accredited, this training programme harnesses decades of combined expertise from product experts at EDA manufacturers and allied trade associations to create an accessible and practical training opportunity for you and your team.

Test your knowledge

Have a go at this quiz sampled from the Heating and Ventilation module. Then check your answers below. If the results show that you need to boost your team’s know-how, talk to the EDA today.

Q1: True or False: The hotter the object the more radiation it gives off.

Q2: What is the advantage of underfloor heating that is on a mat or roll?

Q3: What advantage do mobile air conditioning units have?

Q4: Fill in the missing word: Forward curve fans are very good at providing                     .

Q5: Power x time =

Q6: What is the minimum flow rate for a kitchen sink tap?

Scroll for answers

Q1: True.

Q2: It gives an even spread of heat.

Q3: They can be moved from room to room.

Q4: Pressure.

Q5: Energy

Q6: 6.0 litres

How did you do?

Full marks: Well done!

3-5 out of 6: Not bad. Could the EDA training help you to fill in any gaps in your knowledge and help you progress in your career?

Less than 3: The EDA Product Knowledge Programme could be just what you need to boost sales.

Watch the video and download the Course Directory

There’s plenty of information online at www.eda.org.uk including video and downloadable Course Directory, giving you a summary of what’s covered in each of the 12 training modules.

The EDA team is ready to help. Call 020 3141 7350 or email training@eda.org.uk

For more information, click here

The post EDA Insight modules: Heating and Ventilation quiz appeared first on Professional Electricians Wholesaler.

The EDA’s Product Knowledge Modules help businesses like yours create cross-selling and up-selling opportunities by building knowledge and confidence.

These training modules have recently won a Princess Royal Training Award 2022 so you can be assured of their value.

Distribution, Switchgear and Protection is one of 12 training courses in the programme. The EDA modules are completely flexible and can be studied in any order or combination. You choose only the training your team needs.

E-learning option

By summer 2023 all the EDA training modules will be available in a digital format instead of a printed textbook. The digital learning option is a complete e-learning experience with videos and interactive content. The EDA team is happy to talk you through your options and can give you a demonstration of the new e-learning platform.

The Distribution, Switchgear and Protection training module covers:

• Generation Transmission and Distribution
• Distributing Electricity within a Property
• Protection and Control Devices
• Additional Protection
• Supply and Metering
• Specialist Applications

Years of knowledge to give your team a commercial edge

City & Guilds accredited, this training programme harnesses decades of combined expertise from product experts at EDA manufacturers and allied trade associations to create an accessible and practical training opportunity for you and your team.

EDA Product Knowledge modules are also approved for Continuing Professional Development by The CPD Certification Service.

Test your knowledge

Have a go at this quiz sampled from the Distribution, Switchgear and Protection module. Then check your answers below. If the results show that you need to boost your team’s know-how, talk to the EDA today.

Q1: Give the names of the two current ratings of a circuit-breaker.

Q2: Explain the term “DNO”

Q3: What are the consequences of a poor termination in a consumer unit?

Q4: What does the acronym SCADA stand for?

Q5: What unit of electricity is used for billing purposes?

Q6: What is pulsed output?

Scroll for answers…

How did you do?

Full marks: Well done!

3 – 5 out of 6: Not bad. Could the EDA training help you to fill in any gaps in your knowledge and help you progress in your career?

Less than 3: The EDA Product Knowledge Programme could be just what you need to boost sales.

<Answers to be printed upside down>

Q1: Operation and fault rating.

Q2: Distribution Network Operator.

Q3: Fire, circuit failure or unexpected operation of the circuit protective device.

Q4: Supervisory control and data acquisition

Q5: kWh.

Q6: A means of energy data collection.

Watch the video and download the course directory.

There’s plenty of information online at www.eda.org.uk including video and downloadable course directory, giving you a summary of what’s covered in each of the 12 training modules. The EDA team is ready to help. Call 020 3141 7350 or email training@eda.org.uk

For related articles, click here

The post EDA Insight: Switchgear and Protection quiz appeared first on Professional Electricians Wholesaler.

The EDA’s Product Knowledge Modules help businesses like yours create cross-selling and up-selling opportunities by building knowledge and confidence. What’s more these training modules have recently won a Princess Royal Training Award 2022 so you can be assured of their value.

Lighting (Introduction) is one of 12 training courses in the programme. The EDA modules are completely flexible and can be studied in any order or combination. You choose only the training your team needs.

Professional know-how to drive sales

Improving your team’s technical know-how through the EDA’s training could unlock additional revenue for your business.

These training modules have a 97% feedback rating of Good or Very Good. Here’s what one learner said: “Great modules from start to finish. Great layout and easy to understand. Also great as a refresher.”

Introduction to Lighting provides training in:

• Fundamentals of lighting
• Basics of lighting design
• Safety considerations of lighting
• Maintenance considerations of lighting
• Environmental considerations of lighting

Years of knowledge to give your team a commercial edge

City & Guilds accredited, this training programme harnesses decades of combined expertise from product experts at EDA manufacturers and allied trade associations to create an accessible and practical training opportunity for you and your team.

EDA Product Knowledge modules are also approved for Continuing Professional Development by The CPD Certification Service.

Test your knowledge

Have a go at this quiz sampled from the Lighting Introduction module. Then check your answers below. If the results show that you need to boost your team’s know-how, talk to the EDA today.

Q1: Why is Part L of the Building Regulations and important document?

Q2: What advice would you give to a contractor, who was replacing lamps, about lighting in a corridor of a public building to protect passers-by?

Q3: Thinking about the directions that artificial light can point in, can you name three principle techniques of lighting?

Q4: Which lamp technology is more efficient – incandescent or LED? Can you provide some numbers to confirm your thinking?

Q5: It is important to install LED lamps and luminaires properly. What are the fire risks and how are they dealt with?

Q6: What factors might influence the lifespan of lamps?

(scroll down for answers)

Answers:

Q1: For lighting installations, Part L is concerned with the design assessment and subsequent verification of power consumption in lighting circuits.

Q2: The following advice could be given to a contractor who was replacing lamps on lighting in a corridor of a public buildings to protect passers-by: Consider diversions or barriers. Consider doing the work out of normal working hours.

Q3: The majority of light fittings, or luminaires, use some or all of the following fundamental techniques: (a) direct light; (b) indirect light; and (c) a combination of both direct and indirect light.

Q4: LED is more efficient, with incandescents giving no more than 15 lumens per watt and LEDs often giving more than 100 lumens per watt.

Q5: A by-product of any form of lighting, including LED, is heat. Check that luminaires are ventilated in accordance with manufacturers’ recommendations.

Q6: The following factors might influence the lifespan of lamps:

(a) how long they are used and left on; (b) how often they are switched on or off; and (c) how close the operating environment is to the manufacturer’s original recommendations.

How did you do?

Full marks: Well done!

3 – 5 out of 6: not bad. Could the EDA training help you to fill in any gaps in your knowledge and help you progress in your career?

Less than 3: the EDA Product Knowledge Programme could be just what you need to boost sales.

Watch the video and download the Course Directory

There’s plenty of information online at www.eda.org.uk including videos and a downloadable Course Directory, giving you a summary of what’s covered in each of the 12 training modules.

For more information, click here

The EDA team is ready to help. Call 020 3141 7350 or email training@eda.org.uk

The post EDA Insight: Boost your sales with EDA’s Lighting (Introduction) training course appeared first on Professional Electricians Wholesaler.

The EDA’s Product Knowledge Modules help business like yours create cross-selling and up-selling opportunities by building knowledge and confidence. What’s more these training modules have recently won a Princess Royal Training Award 2022 so you can be assured of their value.

Heating and Ventilation is one of 12 training courses in the programme. The EDA modules are completely flexible and can be studied in any order or combination. You choose only the training your team needs.

Professional know-how to drive sales

Improving your team’s technical know-how through the EDA’s training could unlock additional revenue for your business.

This training course will help your team understand which types of heating, cooling, ventilation and water systems suit the different spaces in our homes or businesses and why, covering:

• The principles of heat
• Heating – elements, controls and types of heaters
• The principles of hot water
• Types of water heaters
• The principles of ventilation
• Ventilation applications

Years of knowledge to give your team a commercial edge

City & Guilds accredited, this training programme harnesses decades of combined expertise from product experts at EDA manufacturers and allied trade associations to create an accessible and practical training opportunity for you and your team.

EDA Product Knowledge modules are also approved for Continuing Professional Development by The CPD Certification Service.

Test your knowledge

Have a go at this quiz sampled from the Heating and Ventilation module. Then check your answers below. If the results show that you need to boost your team’s know-how, talk to the EDA today.

Q1: Which fan type is the most common?

Q2: A PIV system should have the fan located where?

Q3: On the Kelvin scale, what does 18 degrees C equate to?

Q4: True or false: the hotter the object the more radiation it gives off.

Q5: What does MVHR stand for?

Q6: What is another name for a plinth heater?

Scroll down for answers

Answers:

Q1: Axial

Q2: Centrally or in the hallway/landing

Q3: 291

Q4: True

Q5: Mechanical ventilation and heat recovery

Q6: A kick space heater.

How did you do?

Full marks: Well done!

3 – 5 out of 6: Not bad. Could the EDA training help you to fill in any gaps in your knowledge and help you progress in your career?

Less than 3: The EDA Product Knowledge Programme could be just what you need to boost sales.

Watch the video and download the course directory

There’s plenty of information online including video and downloadable course directory, giving you a summary of what’s covered in each of the 12 training modules. For more information, click here

The EDA team is ready to help. Call 020 3141 7350 or email training@eda.org.uk.

The post EDA Insight: Test your Heating and Ventilation knowledge appeared first on Professional Electricians Wholesaler.