LEDVANCE has launched a new product series, EVERLOOP, featuring luminaires with conveniently replaceable LED light sources and drivers.

Using replaceable parts, EVERLOOP products maximise a luminaire’s lifespan, avoiding the need to dispose of complete luminaires and reducing the number of electrical products going into the waste stream.

EVERLOOP products are not only a sustainable choice but also a convenient one for installers and facility managers. The first model of the series to be available is the LEDVANCE Linear IndiviLED Gen 2 in December 2023, offering both direct and indirect versions with on/off or DALI options respectively. The range offers CRI90 and UGR<19 which makes it perfect for office applications.

With a greater lifespan these luminaires are a sustainable and convenient choice for installers, planners, and facility managers, ensuring sustainable efficiency of industrial and office applications as well as public buildings. In addition to an extended lifetime and reduced waste, benefits include cost savings, as well as allowing buildings to maintain the same looks.

The IndiviLED range will be expanded in spring 2024 with further types in the colour black and accessories to create a complete lighting system.

For more information, click here

The post Ledvance | Sustainable luminaires appeared first on Professional Electricians Wholesaler.

Robust and easy to install, the TorlanComm LED battens from Knightsbridge answers the need for a non-corrosive, energy efficient and high performance lighting in variety of applications from residential to industrial or agricultural.

Ideal for commercial applications – both inside and out – the TorlanComm comes in two versions: CCT adjustable and Digital Addressable Lightning Interface (DALI) CCT. The wattages vary from 26W to 62W, outputs are from 3955lm to 9025lm, and colour temperatures offered are 3000K (warm white), 4000K (cool white) and 5700K (daylight). The options available include self-test emergency, microwave and microwave self-test emergency.

TorlanComm is IP65 and IK08 rated, with bodies and diffusers manufactured using impact-resistant, non-corrosive polycarbonate with durable stainless steel clips, and with ceiling and end conduit fixings. The DALI version has built-in control gear for intelligent control integration. Accessories enable the units to be installed onto BESA conduit boxes or suspended from the ceiling where necessary.

For more information, click here

The post Knightsbridge | Led battens appeared first on Professional Electricians Wholesaler.

The new Potentia LED high bay range from Knightsbridge provides an ideal solution for industrial applications requiring versatility, flexibility, durability, control and performance.

The high bays, which come in two sizes, incorporate tri-wattage and dual-CCT functions along with other innovative features to deliver long-life and powerful illumination.

The high bays feature a selectable CCT switch, allowing users to adjust the colour temperature between 4000K and 5000K according to preference; and offer wattages of either 100W, 120W and 150W or 150W, 180W and 200W depending on model.

Suitable for the toughest industrial environments, Potentia are rated to IK08, making them resilient in the face of impacts, and also IP65, ensuring resistance against dust and water ingress. This makes them well-suited for installations in challenging indoor or outdoor settings where protection against moisture and debris is crucial.

Effective control is crucial to lighting performance, and Potentia offers a choice of approaches. First, built-in 0-10V dimming capability comes as standard, while the high bays are supplied with polycarbonate diffusers, ensuring even light distribution that makes them ideal for environments where cleanliness and hygiene are of importance.

Second, a programmable microwave sensor is available which enables the user to set various parameters such as brightness, sensitivity, hold time, standby time and standby dimming. The sensor can be paired with a remote control, giving the ability to control settings to ensure adequate illumination while maintaining energy efficiency.

Finally, when used with an addressable Digital Addressable Lightning Interface (DALI) control system, the DALI module allows the installer to assign an address and a control group to the fixture; this address and control group allows for grouping of fixtures into zones.

For more information, click here

The post Knightsbridge | High bay leds appeared first on Professional Electricians Wholesaler.

Ansell Lighting has unveiled its new slimline LED track lighting range, Primo Track, offering the ultimate in choice and versatility.

Available as a single circuit or OCTO compatible three circuit track spot, with integral driver, Primo Track is suitable for hospitality, residential and retail settings, as well as ancillary applications.

It offers 355° rotation with up to 180° tilt on the bracket, along with interchangeable 24° and 36° lens accessories and multiple track accessories, to deliver a wide variety of customisable layout options.

Offered in black or white with a mirror finish anodised reflector, and with the option of adding a gold trim ring, the track spot’s modern, lightweight aluminum design enables quick and easy installation.

The Primo Track single circuit track spot has 10W, 4000K and 3000K (both 1000lm); 20W, 4000K (2100lm) and 3000K (1900lm); and 30W, 4000K (3000lm) and 3000K (2800lm) options. It is Triac dimmable as standard.

The Primo Track three circuit track spot is available in 10W, 4000K and 3000K options (both 1001lm); 20W, 4000K (2100lm) and 3000K (1900lm); and 30W, 4000K (3000lm) and 3000K (2800lm). It is DALI dimmable as standard.

For more information, click here

The post Ansell lighting | Led track lighting appeared first on Professional Electricians Wholesaler.

An extensive range of customisation options make Ansell Lighting’s new Kamar floodlight a great choice for any application.

With a sleek and modern die-cast design offering beam angles ranging from 8° to 60°, the floodlight is suitable for commercial, hospitality, retail and industrial settings and is also ideal for adding dramatic architectural impact to buildings such as church exteriors.

Multiple control functions including DALI as standard, DMX, and Casambi (on 35W and 100W versions) enable the Kamar to offer complete controllability.

A huge variety of CCT options can be selected – 2000K, 2200K, 2700K, 3000K, 4000K, 5000K, TW and RGWB – to create the optimum in visibility or mood, and accessories such as a low glare hood and honeycomb film provide the solution where applications require glare optimisation and upward lighting.

The Kamar is available in two sizes: 330mm x 219.5mm x 100mm and 452mm x 450mm x 160mm.

For more information, click here

The post Ansell lighting | Floodlights appeared first on Professional Electricians Wholesaler.